Showing posts with label CCNA 2. Show all posts
Showing posts with label CCNA 2. Show all posts
9/16/12
CCNA DISCOVERY 2 CAHPTER 1 V4.1
1. Which two things can be determined by using the ping command? (Choose two.)
the number of routers between the source and destination device
the IP address of the router nearest the destination device
*the average time it takes a packet to reach the destination and for the response to return to the source
*whether or not the destination device is reachable through the network
the average time it takes each router in the path between source and destination to respond
2. What are three main types of high-bandwidth connection options used by medium- to large-sized businesses? (Choose three.)
DSL
cable modem
Ethernet
*metro Ethernet
*T1
*T3
3. What is the maximum T1 transmission speed?
56 kbps
128 kbps
**1.544 Mbps
2.4 Mbps
4. Which of the following start the test of destination reachability?
**echo request issued by source
echo reply issued by source
echo request issued by destination
echo reply issued by destination
5. Which statement describes a function of a Tier 1 ISP?
**peers with other similarly sized ISPs to form the global Internet backbone
uses the services of Tier 3 ISPs to connect to the global Internet backbone
pays Tier 2 ISPs for transit services to connect across continents
limits the offered services to small geographic areas
6. At which point do individuals and small businesses connect directly to the ISP network to obtain Internet access?
**at a POP
at an IXP
at a Metro Ethernet link
on the ISP extranet
7.What information is contained in the numbered RFCs maintained by the IETF?
the rules for acceptable use of websites and e-mail
the descriptions of various hardware components that connect to the Internet
**the specifications and rules for how devices communicate over an IP network
the standards for cabling and wiring for local Ethernet networks
8. Which network support services team is responsible for testing a new customer connection and for monitoring the ongoing operation of the link?"
customer service
help desk
**network operations
on-site installation
9. Which network support services team identifies whether the client site has existing network hardware and circuits installed?
customer service
help desk
network operations
**planning and provisioning
10. Which ISP network support systems team will typically contact the customer once a new circuit is ready and guide the customer in setting up passwords and other account information?
**help desk
customer service
network operations center
on-site installation team
planning and provisioning
11. What feature allows network devices to be scalable?
a fixed number of interfaces
ease of repair
**modularity
low maintenance requirements
low cost
12. Which command generated this output?
1 12.0.0.2 4 msec 4 msec 4 msec
2 23.0.0.3 20 msec 16 msec 16 msec
3 34.0.0.4 16 msec 18 msec 16 msec
**Router# traceroute 34.0.0.4
Router# nslookup 34.0.0.4
Router# ping 34.0.0.4
Router# telnet 34.0.0.4
13. Which network utility helps determine the location of network problems and identifies routers that packets travel across?
ping
ipconfig
**traceroute
ixp
14. What interconnects the Internet backbone?
gateway routers
**IXPs
POPs
satellite dishes
15. What units are used to measure Internet bandwidth?
**bits per second
bytes per second
hertz
megabytes per second
packets per second
16. The IT manager of a medium-sized business wishes to house the company-owned web servers in a facility that offers round-the-clock controlled access, redundant power, and high-bandwidth Internet access. Which ISP service will fulfill this need?
web hosting
planning and provisioning
application hosting
**equipment colocation
Tier 1 ISP services
17. What is the purpose of an RFC?
to provide the connection point for multiple ISPs to the Internet
**to document the development and approval of an Internet standard
to connect a business to an ISP
to provide data communication services to ISP customers
to monitor network performance and connection status of ISP clients
18. When did the Internet become available for use by businesses and consumers?
1979
1984
**1991
1999
2000
19. What was the original purpose of the Internet?
voice communication
marketing
**research
commerce
20. What three support service teams are commonly found within an ISP? (Choose three.)
**help desk
computer support
application readiness
**network operations center
**planning and provisioning
implementation and documentation
CCNA DISCOVERY 2 CAHPTER 1 V4.0
1
What are two mechanisms that provide redundancy for server farm
implementations? (Choose two.)
host intrusion prevention systems
virtual private networks
network intrusion prevention systems
#Rapid Spanning Tree Protocol
#Hot Standby Routing Protocol
2
The ability to connect securely to a private network over a public network is
provided by which WAN technology?
DSL
Frame Relay
ISDN
PSTN
#VPN
3
Which three statements describe the functions of the Cisco hierarchical network
design model? (Choose three.)
Route summarization is not necessary at the core and distribution layers.
#The distribution layer is responsible for traffic filtering and isolating failures from
the core.
#Two goals of the core layer are 100 percent uptime and maximizing throughput.
#The access layer provides a means of connecting end devices to the network.
The distribution layer distributes network traffic directly to end users.
The core layer usually employs a star topology.
4
A network designer is creating a new network. The design must offer enough
redundancy to provide protection against a single link or device failure, yet must not be too
complex or expensive to implement. What topology would fill these needs?
star
full mesh
#partial mesh
extended star
hub and spoke
5
Refer to the exhibit. If the firewall module has been correctly configured using best practices for
network security, which statement is true about the security design for the network?
Servers in the network are not protected from internal attacks.
#Servers in the DMZ are protected from internal and external attacks.
Servers in the server farm are protected from internal and external attacks.
Traffic from the external networks is not able to access the servers in the DMZ.
6
Which statement is true about a DMZ in a traditional network firewall design?
A DMZ is designed to provide service for external access but not for internal access.
#Servers in the DMZ provide limited information that can be accessed from external
networks.
User access to the DMZ from the Internet and the internal network usually is
treated the same way.
All servers in the enterprise network should be located in a DMZ because of enhanced
security measures.
7
download and upload documents on the network file server. What network connection would be
most cost efficient while still meeting the security and connectivity needs of this teleworker?
dedicated leased line connection with a dialup backup link
Frame Relay connection with a DSL backup link
#DSL VPN connection with a dialup backup link
ATM connection with a DSL VPN backup link
DSL connection with no backup link
8
Refer to the exhibit. The network administrator creates a standard access control list to prohibit
traffic from the 192.168.1.0/24 network from reaching the 192.168.2.0/24 network while still
permitting Internet access for all networks. On which router interface and in which direction
should it be applied?
interface fa0/0, inbound
interface fa0/0, outbound
interface fa0/1, inbound
#interface fa0/1, outbound
9
Refer to the exhibit. The server broadcasts an ARP request for the MAC address of its default
gateway. If STP is not enabled, what is the result of this ARP request?
Router_1 contains the broadcast and replies with the MAC address of the next-hop
router.
Switch_A replies with the MAC address of the Router_1 E0 interface.
#Switch_A and Switch_B continuously flood the message onto the network.
Switch_B forwards the broadcast request and replies with the Router_1 address.
10
What are two best practices in wireless LAN design to ensure secure wireless
access to the corporate network? (Choose two.)
Configure APs for broadcast SSID.
Place APs as far apart as possible.
#Use a separate WLAN for employees.
#Configure WPA.
Use wireless routers in all IDFs.
11
In a well-designed, high-availability network, which device significantly affects the
most users if a failure occurs?
desktop PC of the user
large switch in the network core layer
large switch in the network distribution layer
#small workgroup switch in the network access layer
12
Which two statements are true regarding network convergence? (Choose two.)
#In a large network, using the EIGRP or OSPF routing protocols rather than RIPv2 may
improve convergence time.
Using STP at the core layer improves convergence time by allowing the use of
redundant links between devices.
#Route summarization improves convergence time by minimizing the size of the routing
table.
A full mesh topology improves convergence time by allowing load balancing.
ACLs can be configured to improve convergence time.
13
Centralizing servers in a data center server farm can provide which benefit over a
distributed server environment?
It keeps client-to-server traffic local to a single subnet.
Servers located in a data center require less bandwidth.
#It is easier to filter and prioritize traffic to and from the data center.
Server farms are not subject to denial of service attacks.
14
Refer to the exhibit. What effect does the ACL shown have on network traffic, assuming that it is
correctly applied to the interface?
All traffic to network 172.16.0.0 is denied.
All TCP traffic is denied to and from network 172.16.0.0.
#All Telnet traffic from the 172.16.0.0 network to any destination is denied.
All port 23 traffic to the 172.16.0.0 network is denied.
All traffic from the 172.16.0.0 network is denied to any other network.
15
Which Cisco IOS function can be configured at the distribution layer to filter
unwanted traffic and provide traffic management?
virus protection
spyware protection
VPNs
#access control lists
16
What kind of ACL inspects outbound UDP, TCP, and ICMP traffic and allows
inbound access only to traffic that belongs to these established sessions?
dynamic ACL
time-based ACL
#reflexive ACL
lock and key ACL
17
Which three functions are performed at the distribution layer of the hierarchical
network model? (Choose three.)
summarizing routes from the access layer
allowing end users to access the local network
providing the gateway of last resort for core layer devices
preserving bandwidth at the access layer by filtering network functions
#isolating network problems to prevent them from affecting the core layer
#utilizing redundant links for load balancing to increase available bandwidth
18
Refer to the exhibit. Which two devices are part of the access design layer? (Choose two.)
Edge2
ISP4
BR4
#FC-AP
FC-CPE-1
#FC-ASW-2
19
What is true about implementing a centralized server farm topology?
requires direct cabling from the MPOE to enhance the performance of servers
requires the addition of high-capacity switches to each workgroup
#provides defined entry and exit points so that filtering and securing traffic is easier
allows for placement of workgroup servers at the access layer
20
Refer to the exhibit. What happens when Host 1 attempts to send data?
Frames from Host 1 are dropped, but no other action is taken.
#Frames from Host 1 cause the interface to shut down, and a log message is sent.
Frames from Host 1 are forwarded, but a log message is sent.
Frames from Host 1 are forwarded, and the mac-address table is updated.
21
Which two considerations are valid when designing access layer security?(Choose two.)
In a large wireless network, the most efficient method to secure the WLAN is MAC
address filtering.
DoS attacks are normally launched against end-user PCs and can be mitigated by
installing personal firewalls on all company PCs.
#SSH is more secure than Telnet to administer network devices.
#Disabling unused ports on the switches helps prevent unauthorized access to the
network.
All Telnet passwords are at least 6 characters long.
22
What address can be used to summarize only networks 172.16.0.0/24,
172.16.1.0/24, 172.16.2.0/24, and 172.16.3.0/24?
172.16.0.0/21
#172.16.0.0/22
172.16.0.0 255.255.255.248
172.16.0.0 255.255.254.0
23
Which two items in a physical WLAN design can be identified through a site
survey? (Choose two.)
#the types of antennas that are required
the encryption techniques that are required
#the access point hardware that is required
the different levels of access that are required
the connection reliability that is required
24
Refer to the exhibit. Which two statements correctly describe the benefits of the network access
layer design that is shown? (Choose two.)
#If host A sends a broadcast message, only hosts in VLAN10 receive the broadcast frame.
If host A attempts to transmit data at the same time as another host, only hosts in
VLAN10 are affected by the collision.
#Segmenting all voice traffic on a separate VLAN facilitates the implementation of QoS.
VLANs improve network performance by facilitating the use of route
summarization.
VLANs at the access layer help guarantee network availability by facilitating load
balancing.
25
What are three ways to ensure that an unwanted user does not connect to a
wireless network and view the data? (Choose three.)
#Disable SSID broadcasting.
Configure filters to restrict IP addresses.
#Use authentication between clients and the wireless device.
Use NetBIOS name filtering between clients and the wireless device.
#Configure strong encryption such as WPA.
Subscribe to:
Posts (Atom)
